Migrar de Servidor Sun Fire V440 y Sistema Operativo Solaris 8 a Servidor Sun Sparc T4-1(Solaris10) sin Reinstalación.

Migración de Sistema Operativo, Software Aplicativo y Base de Datos Instalados en un Servidor Sun Fire V440 con Solaris 8 a un Servidor Sun Sparc T4-1 con Solaris 10 sin reinstalación.

El objetivo es llevar todo lo instalado en el servidor Sun Fire V440, Sistema Operativo Solaris 8 y aplicativos Oracle sin tener que reinstalar el software.
El Sistema Operativo Solaris 8 no puede ser instalado en el Servidor Sun Sparc T4-1, la version mínima soportada en este servidor es Solaris 10 10/09(u8), No podemos cambiar la version del software aplicativo y bases de datos ni se cuenta con los medios para una reinstalación.

Para lograr esto sin perder la información se instaló primero el Sistema Operativo Solaris 10 u13 en el servidor Sun Sparc T4-1 con el ultimo set de parches disponible.
Luego procedí a tomar una imagen flar completa del Sistema Operativo Solaris 8 2/04 en el servidor Sun Fire V440:
La imagen flar fue creada en los discos internos del servidor Sun Fire V440 y posteriormente copiado al Servidor T4-1

Para crear la imagen flar me conecté al Servidor Sun Fire V440 con usuario root y ejecuté el comando flarcreate de la siguiente manera:

    **La ejecución de este comando requiere usuario root y debemos estar posicionados en el directorio raiz /

    root@roatan # cd /

    root@roatan # flarcreate -S -n s8-roatan /flar/s8-roatan.flar
    Determining which filesystems will be included in the archive...
    Creating the archive...
    cpio: File size of "etc/mnttab" has
    increased by 463
    2756850 blocks
    1 error(s)
    Archive creation complete.

Una vez con la imagen flar creada en el servidor Sun Fire V440, copié el archivo flar a uno de los discos internos del servidor Sparc T4-1.
Me conecté al servidor T4-1 que tiene nombre de host guanaja y procedí con la creación de la zona para albergar el sistema operativo y aplicativos del servidor V440.

Cree la Zona para solaris 8 (branded zone) de la siguiente manera:
#el nombre de la zona se definió como s8-roatan, s8 versión de sistema operativo y roatan el nombre original del host
root@guanaja # zonecfg -z s8-roatan

#se creo una nueva configuración de zona de solaris8 usando el template SUNWsolaris8.
create -t SUNWsolaris8

# se definió el path de instalación de la zona
set zonepath=/zonas/roatan
set autoboot=true

#se seteó la dirección ip para la zona como interface de red virtual heredada de la zona global. aqui se cambió la ip original
add net
set address=172.16.1.18
set physical=bge0
set defrouter=172.16.1.1
end

#debido a que hay aplicativos en el Sistema operativo Solaris 8 instalado cuya licencia esta amarrada al hostid del equipo se definió el parametro hostid en la zona y se seteo con el mismo valor del servidor físico v440
add attr
set name=hostid
set type=string
set value=83123e3e
end
# se definió el parametro machine type para que quedará con la especificación del hardware original Sun Fire V440(sun4u)
add attr
set name=machine
set type=string
set value=sun4u
end

verify

#se salvó la configuración de la zona
commit
exit

#validé la información de definición de la zona
root@guanaja # zonecfg -z s8-roatan info
    zonename: s8-roatan
    zonepath: /zonas/roatan
    brand: solaris8
    autoboot: true
    bootargs:
    pool:
    limitpriv:
    scheduling-class:
    ip-type: shared
    hostid:
    net:
        address: 172.16.1.18
        physical: igb0
        defrouter: 172.16.1.1
    attr:
        name: hostid
        type: string
        value: 83123e3e
    attr:
        name: machine
        type: string
        value: sun4u
   
#exportamos la configuración de la zona para tener un respaldo de la misma
root@guanaja # zonecfg -z s8-roatan export > s8-roatan.config


#Una vez con la zona creada y el archivo imagen flar en el servidor procedimos a instalar la zona utilizando la imagen original del servidor Sun Fire v440, este procedimiento tomó al rededor de 2 horas
#Esta instalación se ejecutó de la siguiente manera:

root@guanaja # zoneadm -z s8-roatan install -p -a /flar/s8_roatan.flar

#despues de instalar la zona se procedió con el boot de la misma con el comando zoneadm boot
root@guanaja # zoneadm -z s8-roatan boot

#validamos que la zona hiso boot
root@guanaja # zoneadm list -icv

  ID NAME       STATUS     PATH                           BRAND    IP   
   0 global           running         /                                    native      shared
   1 s8-roatan     running         /zonas/roatan                 solaris8   shared

#Despues de esto procedimos a hacer login a la zona para validar la instalación y configuración de la misma con el comando zlogin:

root@guanaja # zlogin s8-roatan
[Connected to zone 's8-roatan' pts/1]
Your password will expire in 5 days.
Last login: Wed Jan 30 23:54:08 from 172.16.1.3
Sourcing //.profile-EIS.....
root@roatan # netstat -rn

Routing Table: IPv4
  Destination           Gateway           Flags  Ref     Use     Interface
-------------------- -------------------- ----- ----- ---------- ---------
default              172.16.1.1           UG        1        429          
172.16.1.0           172.16.1.18          U         1         51 igb0:1   
224.0.0.0            172.16.1.18          U         1          0 igb0:1   
127.0.0.1            127.0.0.1            UH        3          9 lo0:1    

root@roatan # uname -X
System = SunOS
Node = roatan
Release = 5.8
KernelID = Generic_Virtual
Machine = sun4u
BusType = <unknown>
Serial = <unknown>
Users = <unknown>
OEM# = 0
Origin# = 1
NumCPU = 64

La zona fue instalada y todos los aplicativos iniciaron sin problemas, la ventana para esta actividad tomó 12 horas desde el inició de la creación de la imagen flar hasta las pruebas finales de los usuarios.

Despues de esto y un periodó de validación de una semana el servidor Sun Fire V440 fue reconfigurado para ambiente de desarrollo y test del aplicativo y base de datos.
  

Solaris 10 VNC: Script para Habilitar VNC en Solaris 10

Solaris ofrece muchas interfaces de acceso remoto como ssh, X11, server remote redirection, etc.
En muchas ocasiones nos es requerido ejecutar tareas o procesos sin que estas se pierdan o se detengan cuando se pierde la conexion al Servidor o Sistema Operativo. Para esto lo mejor es usar VNC, para lo cual Solaris 10 ya incluye su propio vnc basado en servidor X standard  lo cual nos permite redireccionar la pantalla o display en modo virtual a traves de vnc como si fuera un X Display.
A continuación presento un script el cual pueden copiar y ejecutar en el Sistema Operativo Solaris 10 para habilitar el xvnc sin tener que instalar software VNC de terceros:

#!/bin/sh
#
# habilitavnc.sh
# Script para habilitar el vnc en Solaris 10
#
# Ejecutar este script con usuario root
#
# Despues de ejecutar el script puede ingresar con VNC Viewer a
# la ip del servidor a los display :1 y :2
#

# Agrega el display 1 a la configuracion del vnc

svccfg -s application/x11/x11-server add display1
svccfg -s application/x11/x11-server:display1 addpg options application
svccfg -s application/x11/x11-server:display1 addpropvalue options/server astring: "/usr/X11/bin/Xvnc"
svccfg -s application/x11/x11-server:display1 addpropvalue options/server_args astring: '"SecurityTypes=None"'

# Agrega el display 2 a la configuracion del vnc, para poder
# utilizar dos display

svccfg -s application/x11/x11-server add display2
svccfg -s application/x11/x11-server:display2 addpg options application
svccfg -s application/x11/x11-server:display2 addpropvalue options/server astring: "/usr/X11/bin/Xvnc"
svccfg -s application/x11/x11-server:display2 addpropvalue options/server_args astring: '"SecurityTypes=None"'
svccfg -s application/x11/x11-server:display2 addpropvalue options/server_args astring: '"-alwaysshared"'

# Configura el dtlogin para que cargue configuración en cada
# reboot

if [ ! -d /etc/dt/config ] ; then
        mkdir -p /etc/dt/config
fi
if [ ! -f /etc/dt/config/Xservers ] ; then
        cp /usr/dt/config/Xservers /etc/dt/config/Xservers
fi

echo "   :1   Local local_uid@none root /usr/X11/bin/Xserver :1" >> /etc/dt/config/Xservers
echo "   :2   Local local_uid@none root /usr/X11/bin/Xserver :2" >> /etc/dt/config/Xservers

pkill -HUP dtlogin

Administración de Privilegios y Roles en Solaris, RBAC

Se puede dar privilegios especificos a usuarios no root para que ejecuten tareas avanzadas o solo permitidas a usuarios root, esto se puede completar con los siguientes y sencillos pasos:
1. Crear una Cuenta de Role.
2. Setear Password a la cuenta Role.
3. Editar el archivo /etc/security/prof_attr y crear o buscar el profile con la descripcion de las tareas que queremos permitir ejecutar al usuario.
4. Editar el archivo /etc/security/exec_attr para ver o definir lo que el profile puede hacer o ejecutar.
5. Asociar el profile con la cuenta de role con el siguiente comando /usr/bin/rolemod.
6. Agregar el role al usario con el comando usermod.

Ejemplo:

Usar RBAC para permitir a un usuario general o no root reiniciar o apagar el servidor en ventanas de mantenimiento.
Rolename:  mantenimiento
Username:  operador
Profile Name: Maintenance and Repair

1. Crear la cuenta de role:

# roleadd -d /export/home/mantenimiento -m mantenimiento
             
Asignar password a la cuenta de role

# passwd mantenimiento
        
2. validar el profil Maintenance and Repair.

Ver el archivo /etc/security/prof_attr y buscar la linea de Maintenance and Repair:

Maintenance and Repair:::Maintain and repair a system:auths=solaris.smf.manage.system-log,solaris.label.range,solaris.admin.logsvc.write,solaris.admin.logsvc.read,solaris.compsys.write,solaris.compsys.read,solaris.system.shutdown;help=RtMaintAndRepair.html

3. Validar los atributos de ejecución en el archivo /etc/security/exec_attr.
Este define el comando o script a ejecutar y el uid que el role asume al ejecutarlo.

Ver el archivo /etc/security/exec_attr:

Maintenance and Repair:suser:cmd:::/sbin/bootadm:uid=0
Maintenance and Repair:suser:cmd:::/sbin/init:euid=0
Maintenance and Repair:suser:cmd:::/usr/bin/date:euid=0
Maintenance and Repair:suser:cmd:::/usr/bin/ldd:euid=0
Maintenance and Repair:suser:cmd:::/usr/bin/mdb:euid=0
Maintenance and Repair:suser:cmd:::/usr/bin/vmstat:euid=0
Maintenance and Repair:suser:cmd:::/usr/sbin/eeprom:euid=0
Maintenance and Repair:suser:cmd:::/usr/sbin/halt:euid=0
Maintenance and Repair:suser:cmd:::/usr/sbin/poweroff:uid=0
Maintenance and Repair:suser:cmd:::/usr/sbin/prtconf:euid=0
Maintenance and Repair:suser:cmd:::/usr/sbin/reboot:uid=0
Maintenance and Repair:suser:cmd:::/usr/sbin/syslogd:euid=0

4. Use el comando rolemod para agregar los profiles Maintenance and Repair y All al role de la siguiente manera:

# rolemod -P "Maintenance and Repair",All Mantenimiento

5. El comando rolemod actualiza el archivo /etc/user_attr file. Verifique que los cambios fueron hechos.

# more /etc/user_attr 

mantenimiento::::type=role;profiles=Maintenance and Repair,All
operador::::type=normal;roles=mentenimiento

Aqui puede ver facilmente que el role mantenimiento a sido asignado al usuario operador. El profile Maintenance and Repair esta ahora asociado al role mantenimiento.

6. Use el comando usermod para agregar el role al usuario.

# usermod -R mantenimiento <username>

Listo!

Instrucciones para el Usuario:

Debe estar logeado con la cuenta de usuario requerida (en este caso usuario operador).

Cambiar el usuario al Role de la siguiente manera:

$ su - mantenimiento
Password: <enter password>

Una vez que se ha autenticado con el Role puede ejecutar cualquier comando del Profile Maintenance and Repair de la siguiente manera:

$ /sbin/init 5 #para apagar
$ /usr/sbin/reboot #para reiniciar

etc!

Para salir del Role y regresar al usuario inicial escriba exit.

Oracle Solaris 10 Installation on Netra Sparc T4-1

 Oracle Solaris 10 Installation on Netra Sparc T4-1

Oracle(R) Integrated Lights Out Manager

Version 3.2.1.7.f r87330

Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.

Hostname: test-1-mgmt


--> start /HOST/console
Are you sure you want to start /HOST/console (y/n)?  y
Serial console started.  To stop, type #.


{0} ok
{0} ok
{0} ok
{0} ok boot cdrom
Boot device: /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p6  File and args:
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-|/-\|/-\|/-\|/
SunOS Release 5.10 Version Generic_147147-26 64-bit
Copyright (c) 1983, 2013, Oracle and/or its affiliates. All rights reserved.
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface nxge1...
NOTICE: nxge0: xcvr addr:0x10 - link is up 10000 Mbps full duplex
NOTICE: nxge1: xcvr addr:0x11 - link is up 10000 Mbps full duplex
Skipped interface nxge1
Attempting to configure interface nxge0...
Skipped interface nxge0
Attempting to configure interface igb3...
Skipped interface igb3
Attempting to configure interface igb2...
Skipped interface igb2
Attempting to configure interface igb1...
Skipped interface igb1
Attempting to configure interface igb0...
Skipped interface igb0
Attempting to configure interface ixgbe1...
Skipped interface ixgbe1
Attempting to configure interface ixgbe0...
Skipped interface ixgbe0
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: one or more file systems failed to mount
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Search complete.
Discovering additional network configuration...

Select a Language

   0. English
   1. Brazilian Portuguese
   2. French
   3. German
   4. Italian
   5. Japanese
   6. Korean
   7. Simplified Chinese
   8. Spanish
   9. Swedish
  10. Traditional Chinese

Please make a choice (0 - 10), or press h or ? for help: 0
=========================================================================
What type of terminal are you using?
 1) ANSI Standard CRT
 2) DEC VT52
 3) DEC VT100
 4) Heathkit 19
 5) Lear Siegler ADM31
 6) PC Console
 7) Sun Command Tool
 8) Sun Workstation
 9) Televideo 910
 10) Televideo 925
 11) Wyse Model 50
 12) X Terminal Emulator (xterms)
 13) CDE Terminal Emulator (dtterm)
 14) Other
Type the number of your choice and press Return: 3

Completing system identification...

=========================================================================
The Oracle Solaris Installation Program

The Solaris installation program is divided into a series of short sections

  where    you'll be prompted to provide information for the installation.    At

  the end of each section, you'll be able to change the    selections you've

  made before continuing.


  About    navigation...

    - The mouse cannot be used

    - If your keyboard does    not have function keys,    or they    do not

      respond, press ESC; the legend at the    bottom of the screen

      will change to show the ESC keys to use for navigation.

F2_Continue       F6_Help

=========================================================================
Identify This    System


On the next screens, you must    identify this system as    networked or

  non-networked, and set the default time zone and date/time.


  If this system is networked, the software will try to    find the information

  it needs to identify your system; you    will be    prompted to supply any

  information it cannot    find.


  > To begin identifying this system, press F2.

F2_Continue       F6_Help

=========================================================================
Network Connectivity


Specify Yes if the system is connected to the    network    by one of the Solaris

or vendor network/communication Ethernet cards that are supported on the

Solaris CD. See your hardware    documentation for the current list of

supported cards.

Specify No if    the system is connected    to a network/communication card    that

is not supported on the Solaris CD, and follow the instructions listed under

Help.

Networked
[x] Yes
[ ] No

F2_Continue       F6_Help
=========================================================================
Configure Multiple Network Interfaces

Multiple network interfaces have been    detected on this system.  Specify all

of the network interfaces you    want to    configure.

Note:    You must choose    at least one interface to configure.

Network interfaces
[  ] ixgbe0
[  ] ixgbe1
[  ] igb0
[  ] igb1
[  ] igb2
[  ] igb3
[X] nxge0
[  ] nxge1

F2_Continue       F6_Help
=========================================================================
DHCP for nxge0 Specify whether or not this network interface should use DHCP   
to configure itself.  Choose Yes if DHCP is to be used, or No if the network
interface is to be    configured manually.


  NOTE:    DHCP support will not be enabled, if selected, until after the system reboots.

Use DHCP for nxge0
[  ] Yes
[X] No

F2_Continue       F6_Help

=========================================================================
Host Name for    nxge0

Enter    the host name which identifies this system on the network.  The    name
must be unique within    your domain; creating a    duplicate host name will cause
problems on the network after    you install Solaris.


  A host name must have    at least one character;    it can contain letters,

  digits, and minus signs (-).



         Host name for nxge0: test-1


F2_Continue       F6_Help
=========================================================================
IP Address for nxge0

Enter    the Internet Protocol (IP) address for this network interface.    It
must be unique and follow your site's    address    conventions, or
a system/network failure could result.


  IP addresses contain four sets of numbers separated by periods (for example 129.200.9.1).


    IP address for nxge0 10.1.51.13

F2_Continue       F6_Help
=========================================================================
Subnet for nxge0

On this screen you must specify whether this system is part of a subnet.  If you specify incorrectly, the system will have problems communicating on the network after    you reboot.


  > To make a selection, use the arrow keys to highlight the option and press Return to mark it [X].


System part of a subnet
[X] Yes
[  ] No

F2_Continue       F6_Help
=========================================================================
Netmask for nxge0

On this screen you must specify the netmask of your subnet.  A default netmask is shown; do not accept the default unless you are sure it is correct for your subnet.  A netmask must contain four    sets of numbers separated by periods (for example 255.255.255.0).


Netmask for nxge0 255.255.255.0

F2_Continue       F6_Help
=========================================================================
IPv6 for nxge0

Specify whether or not you want to enable IPv6, the next generation Internet Protocol, on this network interface.    Enabling IPv6 will have    no effect if this machine is not on a network that    provides IPv6 service. IPv4 service will not be affected if IPv6 is enabled.


  > To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].


Enable IPv6 for nxge0
[  ] Yes
[X] No

F2_Continue       F6_Help

=========================================================================
Please wait...

Set the Default Route    for nxge0

To specify the default route,    you can    let the    software try to detect one upon reboot, you can specify the IP address of the router, or    you can    choose None.     Choose    None if    you do not have    a router on your subnet.


  > To make a selection, use the arrow keys to select your choice and press

  Return to mark it [X].


Default Route for nxge0
[  ] Detect one upon reboot
[X] Specify one
[  ] None

F2_Continue       F6_Help
=========================================================================
Default Route    IP Address for nxge0

Enter    the IP address of the default route. This entry    will be placed in the /etc/defaultrouter file and will be the default route    after you reboot (example 129.146.89.225).

     Router    IP Address for nxge0 10.1.51.2

F2_Continue       F6_Help
=========================================================================
Confirm Information for nxge0

Confirm the    following information.    If it is correct, press    F2;

to change any information, press F4.


Networked: Yes
DHCP: No
Host name: srp-1
IP address: 10.1.51.13
System part    of a subnet: Yes
Netmask: 255.255.255.0

Enable IPv6: No
Default Route: Specify one
Router IP Address: 10.1.51.2

F2_Continue    F4_Change    F6_Help
=========================================================================
Just a moment...


Configure Security Policy:

Specify Yes if the system will use the Kerberos security mechanism.


  Specify No if    this system will use standard UNIX security.

Configure    Kerberos Security
[  ] Yes
[X] No

F2_Continue       F6_Help
=========================================================================
Confirm Information

Confirm the    following information.    If it is correct, press    F2; to change any information, press F4.



    Configure Kerberos Security: No

F2_Continue    F4_Change    F6_Help

=========================================================================
Please wait...

Starting remote procedure call (RPC) services:

Name Service

On this screen you must provide name service information.  Select the    name service that will be used by this system, or None if your system will    either not use a name service at all, or if it will use a name service not listed here.


  > To make a selection, use the arrow keys to highlight the option and    press Return to    mark it    [X].


Name service
[  ] NIS+
[  ] NIS
[  ] DNS
[  ] LDAP
[X] None

F2_Continue       F6_Help
=========================================================================
Confirm Information

> Confirm the    following information.    If it is correct, press    F2; to change any information, press F4.


Name service: None

F2_Continue    F4_Change    F6_Help


Just a moment...


NFSv4    Domain Name

NFS version 4    uses a domain name that    is automatically derived from the system's naming services. The    derived    domain name is sufficient for most configurations. In a few cases, mounts that cross domain boundaries might cause    files to appear    to be owned by "nobody"    due to the lack    of a common domain name.


  The current NFSv4 default domain is: ""


NFSv4 Domain Configuration

[X] Use the NFSv4    domain derived by the system
[  ] Specify a different NFSv4 domain

F2_Continue       F6_Help
=========================================================================
Confirm Information for NFSv4    Domain
> Confirm the    following information.    If it is correct, press    F2; to change any information, press F4.

         NFSv4 Domain Name:  <<    Value to be derived dynamically    >>

F2_Continue    F4_Change    F6_Help

=========================================================================
Time Zone

On this screen you must specify your default time zone.  You can specify a time zone in three ways:  select one of the continents or oceans from    the list,    select other - offset from GMT,    or other - specify time    zone file.


  > To make a selection, use the arrow keys to highlight the option and press Return to mark it [X].


Continents and Oceans
[  ] Africa
[X] Americas
[  ] Antarctica
[  ] Arctic Ocean
[  ] Asia
[  ] Atlantic Ocean
[  ] Australia
[  ] Europe
[  ] Indian Ocean

F2_Continue       F6_Help
=========================================================================
Country or Region

> To make a selection, use the arrow keys to highlight the option and press Return to mark it [X].


Countries    and Regions
[ ] United States
[ ] Anguilla
[ ] Antigua & Barbuda
[ ] Argentina
[ ] Aruba
[ ] Bahamas
[ ] Barbados
[ ] Belize
[ ] Bolivia
[ ] Bonaire Sint Eustatius & Saba
[ ] Brazil
[ ] Canada
[ ] Cayman Islands
[ ] Guyana
[ ] Haiti  
[X] Honduras
[ ] Jamaica 
[ ] Martinique
[ ] Mexico
[ ] Montserrat
[ ] Nicaragua
[ ] Panama
[ ] Paraguay [K
[ ] Peru 
[ ] Puerto Rico

F2_Continue       F6_Help
=========================================================================
Please wait...


Date and Time

> Accept the default date and    time or    enter
new    values.


  Date and time: 2014-11-06 11:41


         Year    (4 digits)    : 2014

         Month(1-12)    : 11

         Day    (1-31)    : 06

         Hour    (0-23)    : 11

         Minute    (0-59): 41

F2_Continue    F6_Help
=========================================================================
Confirm Information

> Confirm the    following information.    If it is correct, press    F2; to change any information, press F4.


Time zone: America/Tegucigalpa
Date and time: 2014-11-06    11:41:00

F2_Continue    F4_Change    F6_Help


Please wait...


Root Password   

Please enter the root    password for this system.


  The root password may    contain    alphanumeric and special characters.  For  security, the    password will not be displayed on the screen as you type it.


  > If you do not want a root password,    leave both entries blank.


Root password:
Root password:


F2_Continue       F6_Help
=========================================================================
Enabling remote services

Would    you like to enable network services for    use by remote clients?


  Selecting "No" provides a more secure    configuration in

  which    Secure Shell is    the only network service provided to

  remote clients.  Selecting "Yes" enables a larger set    of

  services as in previous Solaris releases. If in doubt, it is

  safe to select "No" as any services can be individually enabled after    installation.


  Note:    This choice only affects initial installs. It doesn't affect upgrades.


Remote services enabled
[X] Yes
[ ] No

F2_Continue       F6_Help

=========================================================================
Provide Oracle Configuration Manager Registration Information

To improve products and services, Oracle Solaris communicates configuration data to Oracle after rebooting.


  You can register your    version    of Oracle Solaris to capture this data for

  your use, or the data    is sent    anonymously.


  For information about    what configuration data    is communicated    and how    to

  control this facility, see the Release Notes or

  www.oracle.com/goto/solarisautoreg


  > Use    the arrow keys to select the option and    press Return to mark it [X].

[ ]I would like to register using My Oracle Support information.

F2_Continue       F6_Help

=========================================================================
Provide Oracle Configuration Manager Registration Information

To send the configuration data anonymously, complete the following fields.

  If using a proxy server, provide the proxy settings.


  For information about    what configuration data    is communicated    and how    to

  control this facility, see the Release Notes or

  www.oracle.com/goto/solarisautoreg


Proxy Server Host Name:
Proxy Server    Port Number:
Proxy User Name:

HTTP Proxy Password:

F2_Continue       F6_Help


=========================================================================
System identification is completed.
System identification complete.
Starting Solaris installation program...
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Solaris Interactive Installation

On the following screens, you    can accept the defaults    or you can customize how Solaris software will be installed by:


    - Selecting the    type of    Solaris    software to install

    - Selecting disks to hold software you've selected

    - Selecting unbundled products to be installed with Solaris

    - Specifying how file systems are laid out on the disks


  After    completing these tasks,    a summary of your selections (called a profile) will    be displayed.


  There    are two    ways to    install    your Solaris software:


   - "Standard"    installs your system from a standard Solaris Distribution.
Selecting    "Standard" allows you to choose    between    initial    install
and upgrade, if your system is upgradable.

   - "Flash" installs your system from one or more Flash Archives.



F2_Standard    F4_Flash    F5_Exit       F6_Help

=========================================================================
iSCSI    Installation

Do you want to install Oracle    Solaris    10 on an iSCSI target?


  NOTE:    You must have created the iSCSI    target before beginning    the OS

  installation and the target system should be running Oracle Solaris 11 or

  Solaris 10 U5    or greater.


  If you choose    to install the OS on a non-iSCSI target, you will be taken

  directly to the Oracle Solaris 10 installation screens.



[X]    Install    on non-iSCSI target
[  ]    Install    on iSCSI target [8B

F2_Continue    F3_Go Back      F5_Exit

=========================================================================
Eject    a CD/DVD Automatically?

During the installation of Solaris software, you may be usingone or more CDs/DVDs. You    can choose to have the system eject each CD/DVD    automatically after    it is installed    or you can choose to manually eject each CD/DVD.


[X]  Automatically eject CD/DVD
[ ]    Manually eject CD/DVD [14B

F2_Continue    F3_Go Back      F5_Exit

=========================================================================
Reboot After Installation?

After    Solaris    software is installed, the system must be rebooted. You    can

  choose to have the system automatically reboot, or you can choose to

  manually reboot the system if    you want to run    scripts    or do other

  customizations before    the reboot.  You can manually reboot a system by using

  the reboot(1M) command.


[X] Auto Reboot
[  ] Manual Reboot [12B

F2_Continue    F3_Go Back      F5_Exit

=========================================================================
Choose Media

Please specify the media from    which you will install the Solaris Operating System.


  Media:


[X]  CD/DVD
[  ] Network File System

F2_Continue    F3_Go Back      F5_Exit

=========================================================================
Initializing

The system is    being initialized.
Loading install media, please wait...

License

You acknowledge    that your use of this Oracle Solaris software product is subject to (i) the license terms that you accepted when you obtained the right to use Oracle    Solaris    software; or (ii) the license terms that you agreed    to when    you placed your    Oracle Solaris software    order     with Oracle; or    (iii) the Oracle Solaris software license terms    included with the hardware that    you acquired from Oracle; or, if (i),

    (ii) or    (iii) are not applicable, then,    (iv) the OTN License Agreement

    for Oracle Solaris (which you acknowledge you have read    and agree to)

    available at http://www.oracle.com/technetwork/licenses/solaris-cluster-express-license-167852.html

    Note: Software downloaded for trial use    or downloaded as replacement

    media may not be used to update    any unsupported    software.

F2_Accept License      F5_Exit
=========================================================================
Select Geographic Regions

Select the geographic    regions    for which support should be installed.


  > [ ]    South America
  > [ ]    Central    America
  > [ ]    Australasia
  > [ ]    Southern Europe
  > [ ]    Eastern    Europe
  > [ ]    Middle East
  > [ ]    Northern Africa
  > [ ]    Southern Africa
  > [ ]    Asia
  > [ ]    Central    Europe
  > [ ]    North America
  > [ ]    Western    Europe
  > [ ]    Northern Europe




Press Return to show components

F2_Continue    F3_Go Back      F5_Exit    F6_Help

=========================================================================
Move left, right, up, down using the arrow keys


Select System    Locale

Select the initial locale to be used after the system    has been installed.

[X]POSIX C ( C    )

F2_Continue    F3_Go Back      F5_Exit    F6_Help

=========================================================================
Additional Products

To scan for additional products, select the location you wishto scan.

Products found at the    selected location that are in a    Web Start Ready install form will be added to    the Products list.


  Web Start Ready product scan location:


[X]  None
[  ]  CD/DVD
[  ]  Network File System

F2_Continue    F3_Go Back      F5_Exit

=========================================================================
Choose Filesystem Type

Select the filesystem    to use for your    Solaris    installation


[X]  UFS
[  ]  ZFS

F2_Continue    F3_Go Back      F5_Exit    F6_Help

=========================================================================
Select Software

Select the Solaris software to install on the    system.


  NOTE:    After selecting    a software group, you can add or remove    software by

  customizing it. However, this    requires understanding of software

  dependencies and how Solaris software    is packaged.

[X] Entire Distribution plus OEM    support...    10358.00 MB
[  ] Entire Distribution ......................    10317.00 MB
[  ] Developer System Support  .................    10088.00 MB
[  ] End User System Support ...................    9048.00  MB
[  ] Core    System Support ......................    5097.00  MB
[  ] Reduced Networking Core System Support ....    5041.00  MB

F2_Continue    F3_Go Back      F4_Customize      F5_Exit    F6_Help


Please wait ...

On this screen you must select the disks for installing Solaris software.

 Start    by looking at the Suggested Minimum field; this    value is the

  approximate space needed to install the software you've selected. Keep

  selecting disks until    the Total Selected value exceeds the Suggested Minimum

  value.

  NOTE:    ** denotes current boot    disk


  Disk Device  Available Space

  =============================================================================

  [X] c0t5000CCA0541D3CA4d0 286090 MB

  [  ]     c0t5000CCA0541DBA88d0 286090 MB

  [X]     c0t5000CCA0541EBFA4d0 286090 MB

  [  ]     c0t5000CCA0541F1018d0 286090 MB

Total Selected:      0 MB
Suggested Minimum:   5323 MB


F2_Continue    F3_Go Back      F4_Edit    F5_Exit    F6_Help

=========================================================================
Preserve Data?

Do you want to preserve existing data? At least one of the disks you've selected for installing Solaris software has file systems or unnamed slices that you may want to save.

F2_Continue    F3_Go Back      F4_Preserve     F5_Exit    F6_Help

Automatically    Layout File Systems?

Do you want to use auto-layout to automatically layout file systems?

  Manually laying out file systems requires advanced system administration skills.

F2_Auto Layout    F3_Go Back    F4_Manual Layout     F5_Exit    F6_Help

=========================================================================
File System and Disk Layout

The summary below is your current file system    and disk layout, based on the information you've supplied.


  NOTE:    If you choose to customize, you    should understand file systems,    their

  intended purpose on the disk,    and how    changing them may affect the operation

  of the system.

File sys/Mnt point Disk/Slice    Size
================================================================
Overlap          c0t5000CCA0541D3CA4d0s2            286090  MB
overlap         c0t5000CCA0541EBFA4d0s2            286090  MB

F2_Continue    F3_Go Back      F4_Customize      F5_Exit    F6_Help

Preparing system for Solaris install

Configuring disk (c0t5000CCA0541D3CA4d0)
    - Creating Solaris disk label (VTOC)

Configuring disk (c0t5000CCA0541EBFA4d0)
    - Creating Solaris disk label (VTOC)

Creating and checking file systems
    - Creating / (c0t5000CCA0541D3CA4d0s0)
    - Creating /var (c0t5000CCA0541D3CA4d0s3)
    - Creating /globaldevices (c0t5000CCA0541D3CA4d0s6)

Beginning Solaris software installation

=========================================================================

     Solaris Initial Install


    MBytes Installed:     0.00
    MBytes Remaining:  4066.34

Installing: Fujitsu SunOS Header Files