Configuración IPMP con Vlan Tag en Solaris 10: 
Interfaces de Red a Utilizar:
 
  
OS Interface 
 | 
  
PCI Slot/Port 
 | 
  
VLAN trunk 
 | 
  
Comments 
 | 
 
  
nxge-0 
 | 
  
XAUI 1 
 | 
  
2,10 
 | 
  
VPN and ClInterconnect vlans 
 | 
 
  
nxge-1 
 | 
  
XAUI 2 
 | 
  
200,15 
 | 
  
Backup and Public vlans 
 | 
 
  
ixgbe-0 
 | 
  
PCI/ETH 0 
 | 
  
200,15 
 | 
  
Backup and Public vlans 
 | 
 
  
Ixgbe-1 
 | 
  
PCI/ETH 1 
 | 
  
2,10 
 | 
  
VPN and ClInterconnect vlans 
 | 
 
 
 
Redes a Configurar:
 
  
Hostname 
 | 
  
FO IP-Address 
 | 
  
1st NIC 
Vlan 2 
 | 
  
IP-Address 
 | 
  
2nd NIC 
Vlan 2 
 | 
  
IP-Address 
 | 
  
IPMP Group 
 | 
 
  
test-1 
 | 
  
10.1.51.1 
 | 
  
nxge2000 
 | 
  
10.1.51.11 
 | 
  
ixgbe2001 
 | 
  
10.1.51.21 
 | 
  
vpn 
 | 
 
  
test-2 
 | 
  
10.1.51.2 
 | 
  
nxge2000 
 | 
  
10.1.51.12 
 | 
  
ixgbe2001 
 | 
  
10.1.51.22 
 | 
  
vpn 
 | 
 
  
test-3 
 | 
  
10.1.52.1 
 | 
  
nxge2000 
 | 
  
10.1.52.11 
 | 
  
ixgbe2001 
 | 
  
10.1.52.21 
 | 
  
vpn 
 | 
 
 
 
  
Hostname 
 | 
  
FO IP-Address 
 | 
  
1st NIC 
Vlan 15 
 | 
  
IP-Address 
 | 
  
2nd NIC 
Vlan 15 
 | 
  
IP-Address 
 | 
  
IPMP Group 
 | 
 
  
test-1-pub 
 | 
  
172.28.10.103 
 | 
  
nxge15001 
 | 
  
172.28.10.104 
 | 
  
ixgbe15000 
 | 
  
172.28.10.105 
 | 
  
pub 
 | 
 
  
test-2-pub 
 | 
  
172.28.10.106 
 | 
  
nxge15001 
 | 
  
172.28.10.107 
 | 
  
ixgbe15000 
 | 
  
172.28.10.108 
 | 
  
pub 
 | 
 
  
test-3-pub 
 | 
  
172.28.10.109 
 | 
  
nxge15001 
 | 
  
172.28.10.110 
 | 
  
ixgbe15000 
 | 
  
172.28.10.111 
 | 
  
pub 
 | 
 
 
 
  
Hostname 
 | 
  
FO IP-Address 
 | 
  
1st NIC 
Vlan 200 
 | 
  
IP-Address 
 | 
  
2nd NIC 
Vlan 200 
 | 
  
IP-Address 
 | 
  
IPMP Group 
 | 
 
  
test-1-bak 
 | 
  
10.2.51.1 
 | 
  
nxge200001 
 | 
  
10.2.51.11 
 | 
  
ixgbe200100 
 | 
  
10.2.51.21 
 | 
  
bak 
 | 
 
  
test-2-bak 
 | 
  
10.2.51.2 
 | 
  
nxge200001 
 | 
  
10.2.51.12 
 | 
  
ixgbe200100 
 | 
  
10.2.51.22 
 | 
  
bak 
 | 
 
  
test-3-bak 
 | 
  
10.2.52.1 
 | 
  
nxge200001 
 | 
  
10.2.52.11 
 | 
  
ixgbe200100 
 | 
  
10.2.52.21 
 | 
  
bak 
 | 
 
 
 
Se dejó el mismo Archivo /etc/host en todos los nodos:
#
Red Priv
10.1.51.1           test-1 test-1. SYB_LIC
10.1.51.11          test-1-nxge0  test-1-nxge0.2    test-1-nxge2000
10.1.51.21          test-1-ixgbe1 test-1-ixgbe1.2   test-1-ixgbe2001
10.1.51.2           test-2 test-2.    
10.1.51.12          test-2-nxge0  test-2-nxge0.2    test-2-nxge2000
10.1.51.22          test-2-ixgbe1 test-2-ixgbe1.2   test-2-ixgbe2001
10.1.52.1           test-3 test-3.
10.1.52.11          test-3-nxge0  test-3-nxge0.2    test-3-nxge2000
10.1.52.21          test-3-ixgbe1 test-3-ixgbe1.2   test-3-ixgbe2001
#
Red public
172.28.10.103       test-1-pub
172.28.10.104       test-1-pub-nxge1  test-1-pub-nxge1.15     test-1-pub-nxge15001
172.28.10.105       test-1-pub-ixgbe0 test-1-pub-ixgbe0.15    test-1-pub-ixgbe15000
172.28.10.106       test-2-pub
172.28.10.107       test-2-pub-nxge1  test-2-pub-nxge1.15     test-2-pub-nxge15001
172.28.10.108       test-2-pub-ixgbe0 test-2-pub-ixgbe0.15    test-2-pub-ixgbe15000
172.28.10.109       test-3-pub
172.28.10.110       test-3-pub-nxge1  test-3-pub-nxge1.15     test-3-pub-nxge15001
172.28.10.111       test-3-pub-ixgbe0 test-3-pub-ixgbe0.15    test-3-pub-ixgbe15000
#
Red backup
10.2.51.1           test-1-bak
10.2.51.11          test-1-bak-nxge1  test-1-bak-nxge1.200    test-1-bak-nxge200001
10.2.51.21          test-1-bak-ixgbe0 test-1-bak-ixgbe0.200   test-1-bak-ixgbe200000
10.2.51.2           test-2-bak
10.2.51.12          test-2-bak-nxge1  test-2-bak-nxge1.200    test-2-bak-nxge200001
10.2.51.22          test-2-bak-ixgbe0 test-2-bak-ixgbe0.200   test-2-bak-ixgbe200000
10.2.52.1           test-3-bak
10.2.52.11          test-3-bak-nxge1  test-3-bak-nxge1.200    test-3-bak-nxge200001
10.2.52.21          test-3-bak-ixgbe0 test-3-bak-ixgbe0.200   test-3-bak-ixgbe200000
 
Configuración IPMP en cada nodo:
Nodo test-1:
/etc/hostname.nxge2000
group
priv
set
test-1 netmask + broadcast + up
addif
test-1-nxge2000 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe2001
group
priv
set
test-1-ixgbe2001 netmask + broadcast + -failover deprecated up
standby
/etc/hostname.nxge200001
group
bak
set
test-1-bak netmask + broadcast + up
addif
test-1-nxge200001 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe200000
group
bak
set
test-1-ixgbe200000 netmask + broadcast + -failover deprecated up
standby
/etc/hostname.nxge15001
group
pub
set
test-1-pub netmask + broadcast + up
addif
test-1-nxge15001 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe15000
group
pub
set
test-1-ixgbe15000 netmask + broadcast + -failover deprecated up
standby
/etc/init.d/ipmp.targets
#
To install:
#
1) cp ipmp.targets /etc/init.d
#
2) perform edits on the script as required (e.g: add TARGETS)
#
3) chmod 744 /etc/init.d/ipmp.targets
#
4) chown root:sys /etc/init.d/ipmp.targets
#
5) ln /etc/init.d/ipmp.targets /etc/rc2.d/S70ipmp.targets
#
cat /etc/init.d/ipmp.targets
#
/bin/sh
#
Edit the following IPMP test TARGETS to suit your needs.
#
To install:
#
1) cp ipmp.targets /etc/init.d
#
2) perform edits on the script as required (e.g: add TARGETS)
#
3) chmod 744 /etc/init.d/ipmp.targets
#
4) chown root:sys /etc/init.d/ipmp.targets
#
5) ln /etc/init.d/ipmp.targets /etc/rc2.d/S70ipmp.targets
#
#
default targets for SCP's
TARGETS="test-1
test-3 test-2 ccp-1 test-1-pub test-3-pub test-2-pub ccp-m1-pub"
HOSTNAME=`hostname`
echo
"Will add static routes for host $HOSTNAME"
if
[ $HOSTNAME = "ccp-m1" ]; then
       
TARGETS="dp-1 test-3 test-2 test-1-pub test-3-pub test-2-pub"
fi
if
[ $HOSTNAME = "test-1" ]; then
       
TARGETS="test-3 test-2 ccp-1 ccp-m1-pub test-3-pub test-2-pub"
fi
if
[ $HOSTNAME = "test-2" ]; then
       
TARGETS="test-1 test-3 ccp-1 test-1-pub ccp-m1-pub test-3-pub"
fi
if
[ $HOSTNAME = "test-3" ]; then
       
TARGETS="test-1 test-2 ccp-1 test-1-pub ccp-m1-pub test-2-pub"
fi
case
"$1" in
   
'start')
       
/usr/bin/echo "Adding static routes for use as IPMP targets"
    
   for target in $TARGETS; do
               
/usr/sbin/route add -host $target $target
       
done
       
;;
   
'stop')
       
/usr/bin/echo "Removing static routes for use as IPMP targets"
       
for target in $TARGETS; do
               
/usr/sbin/route delete -host $target $target
       
done
       
;;
esac
#
nevala - Saturday January 27 23:36:25 GMT 2007
ifconfig
nxge15001 netmask 255.255.255.0
ifconfig
ixgbe15001 netmask 255.255.255.0
 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000 
ixgbe2001: flags=269040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 1500 index 4
    inet 10.1.51.21 netmask ffe00000 broadcast 10.31.255.255
    groupname priv
    ether 0:10:e0:58:73:8e 
ixgbe15000: flags=269000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 0 index 2
    inet 0.0.0.0 netmask 0 
    groupname pub
    ether 0:10:e0:58:73:8e 
ixgbe20001: flags=201008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4,CoS> mtu 1500 index 8
    inet 172.16.0.67 netmask ffffffc0 broadcast 172.16.0.127
    ether 0:10:e0:58:73:8e 
ixgbe200000: flags=269000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 0 index 3
    inet 0.0.0.0 netmask 0 
    groupname bak
    ether 0:10:e0:58:73:8e 
nxge2000: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
    inet 10.1.51.1 netmask ffe00000 broadcast 10.31.255.255
    groupname priv
    ether 0:10:e0:58:73:8e 
nxge2000:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 6
    inet 10.1.51.11 netmask ffe00000 broadcast 10.31.255.255
nxge2000:2: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 6
    inet 10.1.51.101 netmask ffe00000 broadcast 10.31.255.255
nxge2000:3: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 6
    inet 10.1.51.102 netmask ffe00000 broadcast 10.31.255.255
nxge10000: flags=201008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4,CoS> mtu 1500 index 9
    inet 172.16.0.131 netmask ffffffc0 broadcast 172.16.0.191
    ether 0:10:e0:58:73:8e 
nxge15001: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
    inet 172.28.10.16 netmask ffffffc0 broadcast 172.28.10.63
    groupname pub
    ether 0:10:e0:58:73:8e 
nxge15001:1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
    inet 0.0.0.0 netmask 0 
nxge15001:2: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 5
    inet 172.28.10.30 netmask ffffffc0 broadcast 172.28.10.63
nxge15001:3: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 5
    inet 172.28.10.6 netmask ffffffc0 broadcast 172.28.10.63
nxge15001:4: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 5
    inet 172.28.10.37 netmask ffffffc0 broadcast 172.28.10.63
nxge200001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
    inet 10.2.51.1 netmask fffff800 broadcast 10.2.55.255
    groupname bak
    ether 0:10:e0:58:73:8e 
nxge200001:1: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
    inet 0.0.0.0 netmask 0 
usbecm0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 10
    inet 169.254.182.77 netmask ffffff00 broadcast 169.254.255.255
    ether 2:21:28:57:47:17 
clprivnet0: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 11
    inet 172.16.2.3 netmask ffffff00 broadcast 172.16.2.255
    ether 0:0:0:0:0:3 
Nodo test-2:
1.1.1.  
IPMP Configuration
/etc/hostname.nxge2000
group
priv
set
test-2 netmask + broadcast + up
addif
test-2-nxge2000 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe2001
group
priv
set
test-2-ixgbe2001 netmask + broadcast + -failover deprecated up
standby
/etc/hostname.nxge200001
group
bak
set
test-2-bak netmask + broadcast + up
addif
test-2-nxge200001 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe200000
group
bak
set
test-2-ixgbe200000 netmask + broadcast + -failover deprecated up
standby
/etc/hostname.nxge15001
group
pub
set
test-2-pub netmask + broadcast + up
addif
test-2-nxge15001 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe15000
group
pub
set
test-2-ixgbe15000 netmask + broadcast + -failover deprecated up
standby
/etc/init.d/ipmp.targets
#
To install:
#
1) cp ipmp.targets /etc/init.d
#
2) perform edits on the script as required (e.g: add TARGETS)
#
3) chmod 744 /etc/init.d/ipmp.targets
#
4) chown root:sys /etc/init.d/ipmp.targets
#
5) ln /etc/init.d/ipmp.targets /etc/rc2.d/S70ipmp.targets
#
cat /etc/init.d/ipmp.targets
#
/bin/sh
#
Edit the following IPMP test TARGETS to suit your needs.
#
To install:
#
1) cp ipmp.targets /etc/init.d
#
2) perform edits on the script as required (e.g: add TARGETS)
#
3) chmod 744 /etc/init.d/ipmp.targets
#
4) chown root:sys /etc/init.d/ipmp.targets
#
5) ln /etc/init.d/ipmp.targets /etc/rc2.d/S70ipmp.targets
#
#
default targets for SCP's
TARGETS="test-1
test-3 test-2 ccp-1 test-1-pub test-3-pub test-2-pub ccp-m1-pub"
HOSTNAME=`hostname`
echo
"Will add static routes for host $HOSTNAME"
if
[ $HOSTNAME = "ccp-m1" ]; then
       
TARGETS="dp-1 test-3 test-2 test-1-pub test-3-pub test-2-pub"
fi
if
[ $HOSTNAME = "test-1" ]; then
       
TARGETS="test-3 test-2 ccp-1 ccp-m1-pub test-3-pub test-2-pub"
fi
if
[ $HOSTNAME = "test-2" ]; then
       
TARGETS="test-1 test-3 ccp-1 test-1-pub ccp-m1-pub test-3-pub"
fi
if
[ $HOSTNAME = "test-3" ]; then
       
TARGETS="test-1 test-2 ccp-1 test-1-pub ccp-m1-pub test-2-pub"
fi
case
"$1" in
   
'start')
       
/usr/bin/echo "Adding static routes for use as IPMP targets"
    
   for target in $TARGETS; do
               
/usr/sbin/route add -host $target $target
       
done
       
;;
   
'stop')
       
/usr/bin/echo "Removing static routes for use as IPMP targets"
       
for target in $TARGETS; do
               
/usr/sbin/route delete -host $target $target
       
done
       
;;
esac
#
nevala - Saturday January 27 23:36:25 GMT 2007
ifconfig
nxge15001 netmask 255.255.255.0
ifconfig
ixgbe15001 netmask 255.255.255.0
# ifconfig -a 
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000 
ixgbe2001: flags=269040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 1500 index 4
    inet 10.1.51.22 netmask ffe00000 broadcast 10.31.255.255
    groupname priv
    ether 0:10:e0:58:75:46 
ixgbe15000: flags=269000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 0 index 2
    inet 0.0.0.0 netmask 0 
    groupname pub
    ether 0:10:e0:58:75:46 
ixgbe20001: flags=201008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4,CoS> mtu 1500 index 8
    inet 172.16.0.66 netmask ffffffc0 broadcast 172.16.0.127
    ether 0:10:e0:58:75:46 
ixgbe200000: flags=269000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 0 index 3
    inet 0.0.0.0 netmask 0 
    groupname bak
    ether 0:10:e0:58:75:46 
nxge2000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 6
    inet 10.1.51.2 netmask ffe00000 broadcast 10.31.255.255
    groupname priv
    ether 0:10:e0:58:75:46 
nxge2000:1: flags=209040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,CoS> mtu 1500 index 6
    inet 10.1.51.12 netmask ffe00000 broadcast 10.31.255.255
nxge10000: flags=201008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4,CoS> mtu 1500 index 9
    inet 172.16.0.130 netmask ffffffc0 broadcast 172.16.0.191
    ether 0:10:e0:58:75:46 
nxge15001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
    inet 172.28.10.53 netmask ffffffc0 broadcast 172.28.10.63
    groupname pub
    ether 0:10:e0:58:75:46 
nxge15001:1: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
    inet 0.0.0.0 netmask 0 
nxge200001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
    inet 10.2.51.2 netmask fffff800 broadcast 10.2.55.255
    groupname bak
    ether 0:10:e0:58:75:46 
nxge200001:1: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
    inet 0.0.0.0 netmask 0 
usbecm0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 10
    inet 169.254.182.77 netmask ffffff00 broadcast 169.254.255.255
    ether 2:21:28:57:47:17 
clprivnet0: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 11
    inet 172.16.2.2 netmask ffffff00 broadcast 172.16.2.255
    ether 0:0:0:0:0:2 
Nodo test-3:
1.1.1.  
IPMP Configuration
/etc/hostname.nxge2000
group
priv
set
test-3 netmask + broadcast + up
addif
test-3-nxge2000 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe2001
group
priv
set
test-3-ixgbe2001 netmask + broadcast + -failover deprecated up
standby
/etc/hostname.nxge200001
group
bak
set
test-3-bak netmask + broadcast + up
addif
test-3-nxge200001 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe200000
group
bak
set
test-3-ixgbe200000 netmask + broadcast + -failover deprecated up
standby
/etc/hostname.nxge15001
group
pub
set
test-3-pub netmask + broadcast + up
addif
test-3-nxge15001 netmask + broadcast + -failover deprecated up
/etc/hostname.ixgbe15000
group
pub
set
test-3-ixgbe15000 netmask + broadcast + -failover deprecated up
standby
/etc/init.d/ipmp.targets
#
To install:
#
1) cp ipmp.targets /etc/init.d
#
2) perform edits on the script as required (e.g: add TARGETS)
#
3) chmod 744 /etc/init.d/ipmp.targets
#
4) chown root:sys /etc/init.d/ipmp.targets
#
5) ln /etc/init.d/ipmp.targets /etc/rc2.d/S70ipmp.targets
#
cat /etc/init.d/ipmp.targets
#
/bin/sh
#
Edit the following IPMP test TARGETS to suit your needs.
#
To install:
#
1) cp ipmp.targets /etc/init.d
#
2) perform edits on the script as required (e.g: add TARGETS)
#
3) chmod 744 /etc/init.d/ipmp.targets
#
4) chown root:sys /etc/init.d/ipmp.targets
#
5) ln /etc/init.d/ipmp.targets /etc/rc2.d/S70ipmp.targets
#
#
default targets for SCP's
TARGETS="test-1
test-3 test-2 ccp-1 test-1-pub test-3-pub test-2-pub ccp-m1-pub"
HOSTNAME=`hostname`
echo
"Will add static routes for host $HOSTNAME"
if
[ $HOSTNAME = "ccp-m1" ]; then
       
TARGETS="dp-1 test-3 test-2 test-1-pub test-3-pub test-2-pub"
fi
if
[ $HOSTNAME = "test-1" ]; then
       
TARGETS="test-3 test-2 ccp-1 ccp-m1-pub test-3-pub test-2-pub"
fi
if
[ $HOSTNAME = "test-2" ]; then
       
TARGETS="test-1 test-3 ccp-1 test-1-pub ccp-m1-pub test-3-pub"
fi
if
[ $HOSTNAME = "test-3" ]; then
       
TARGETS="test-1 test-2 ccp-1 test-1-pub ccp-m1-pub test-2-pub"
fi
case
"$1" in
   
'start')
       
/usr/bin/echo "Adding static routes for use as IPMP targets"
    
   for target in $TARGETS; do
               
/usr/sbin/route add -host $target $target
       
done
       
;;
   
'stop')
       
/usr/bin/echo "Removing static routes for use as IPMP targets"
       
for target in $TARGETS; do
               
/usr/sbin/route delete -host $target $target
       
done
       
;;
esac
#
nevala - Saturday January 27 23:36:25 GMT 2007
ifconfig
nxge15001 netmask 255.255.255.0
ifconfig
ixgbe15001 netmask 255.255.255.0
 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000 
ixgbe2001: flags=269040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 1500 index 4
    inet 10.1.52.21 netmask ffe00000 broadcast 10.31.255.255
    groupname priv
    ether 0:10:e0:58:27:26 
ixgbe15000: flags=269000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 0 index 2
    inet 0.0.0.0 netmask 0 
    groupname pub
    ether 0:10:e0:58:27:26 
ixgbe20001: flags=201008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4,CoS> mtu 1500 index 8
    inet 172.16.0.65 netmask ffffffc0 broadcast 172.16.0.127
    ether 0:10:e0:58:27:26 
ixgbe200000: flags=269000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,STANDBY,INACTIVE,CoS> mtu 0 index 3
    inet 0.0.0.0 netmask 0 
    groupname bak
    ether 0:10:e0:58:27:26 
nxge2000: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
    inet 10.1.52.1 netmask ffe00000 broadcast 10.31.255.255
    groupname priv
    ether 0:10:e0:58:27:26 
nxge2000:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 6
    inet 10.1.52.11 netmask ffe00000 broadcast 10.31.255.255
nxge2000:2: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 6
    inet 10.1.52.105 netmask ffe00000 broadcast 10.31.255.255
nxge2000:3: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 6
    inet 10.1.52.101 netmask ffe00000 broadcast 10.31.255.255
nxge10000: flags=201008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4,CoS> mtu 1500 index 9
    inet 172.16.0.129 netmask ffffffc0 broadcast 172.16.0.191
    ether 0:10:e0:58:27:26 
nxge15001: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
    inet 172.28.10.46 netmask ffffffc0 broadcast 172.28.10.63
    groupname pub
    ether 0:10:e0:58:27:26 
nxge15001:1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
    inet 0.0.0.0 netmask 0 
nxge15001:2: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 5
    inet 172.28.10.49 netmask ffffffc0 broadcast 172.28.10.63
nxge15001:3: flags=1001040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,FIXEDMTU> mtu 1500 index 5
    inet 172.28.10.42 netmask ffffffc0 broadcast 172.28.10.63
nxge200001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
    inet 10.2.52.1 netmask fffff800 broadcast 10.2.55.255
    groupname bak
    ether 0:10:e0:58:27:26 
nxge200001:1: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
    inet 0.0.0.0 netmask 0 
clprivnet0: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 10
    inet 172.16.2.1 netmask ffffff00 broadcast 172.16.2.255
    ether 0:0:0:0:0:1 
usbecm0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 11
    inet 169.254.182.77 netmask ffffff00 broadcast 169.254.255.255
    ether 2:21:28:57:47:17